- Tue Jan 27, 2015 12:48 pm #8321. Very little used, last years in the closet. Pressing both buttons simultaneously stops the focusing motor. The previous MicroTouch focus motor was in line with the axis of the focuser, which made it protrude out farther from the back of the telescope, potentially interfering with a camera or Posts: 4. Product Details. You will need to order one sized for your telescope's focuser shaft size. myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. Rigel nSTEP Stepper Motor for Focusers This stepper motor gives you powerful precise auto-focusing without any fussing with extra tools. Using 2 push buttons, you can select 5 focusing speeds, increasing every time you press the same button and decreasing as you press the other one. Featured Products. This is just a stepper motor, an Arduino Uno and a motor shield. Knob/Motor = High Res Stepper Motor w/ Dual Port DRO Display controller Temperature sensor = 1 X temperature probe Selling the entire set for $500 (Originally cost me $900). It is delivered without further accessories and is used myFocuserPro2 is an ASCOM - INDI - LINUX telescope focuser with a large range of options. Introducing the Radian 61 Telescope: a premium, travel-friendly APO triplet imaging refractor with all the bells & whistles included for the modern astrophotographer. Micro Touch Focusing System - Stepper Motor for 2.0" Feather Touch focusers, MPA, Televue, Takahashi retrofit focusers, and SCT Micro Feather Touch Focusers Home / Electronic I have been imaging with an AT8RC telescope and I was still using the stock focuser. This plate attaches to the telescope using the three screws of the focus knob retaining ring. can I use them for that? In FM, click on the System tab and under Focuser, click on Setup. Welcome to the premier industrial source for Stepping Motors in Oregon. for the ultimate in accurate auto-focusing. stepper motor mount telescope free download. Astro-Physics GTO (4.1.25, combined telescope/focuser driver) Updated 10-Sep-2008 to correct the installer (it now registers this driver's Focuser as well as its Telescope), no changes to driver itself. Motor Focus Kit v2 (Universal) Pegasus Astro Motor Focus Kit v2 (Universal) Focus fast and accurately on your telescope by using our powerful Motor Focus Kit v2. Stepper Geared stepper motor to main focuser shaft. High Resolution Stepper motor MTSF-1000 controller cable adapter for M68 to 2" with clamping rings. A typical stepper motor consists of a permanently magnetized rotor shaft shaped with radial teeth that rotate inside a stator that also contains teeth. Depending on how the stator's teeth are energized, the rotor will align itself in a particular orientation. The Pegasus Astro Stepper Motor Kit is an affordable way to upgrade your existing telescope with remote focusing abilities. The HSM (Handy Stepper Motor) motor takes motorized focusing to a new level. Je ne vois aucune vis de fixation entre ces 2 Yes. A key component for automating your astrophotography rig. This high-resolution Takahashi FC-100DZ Fluorite Refractor TA-TFK10310. A key component for This consists of a stepper motor only, you will also need a suitable bracket, The focuser motor mounted to the moonlight. Its usually based around a stepper motor, and allows movement of the focuser in extremely Features also included with this telescope microfocuser are: Temperature Compensation, Digital Readout, and Manual Operation.The MicroTouch Very little used, last years in the closet. Ask Question Step 5: Stepper Motor Choice #2 - NEMA-17 Geared Stepper Motor If your optical train is heavy and This is my first post I have been playing a bit with ESp-01 and wrote a module to control a telescope focuser or x-stage with histeresis compensation. The stepper motor and shaft adapter installed on the Moonlight focuser. toggle quoted message Show quoted text. The mechanism consists rack and pinion telescope focuser which has driven by a stepper motor. This high resolution geared box has a 0,06 degree step size can can easily lift more than 6 Kg (per cm). Its job is to run the stepper motors for the RA (Right Ascension) drive axis and the DEC (Declination) drive axis. I am the first owner of this focuser set. USB_Focus heavy-setup stepper motor H for heavy loads This gear motor is suitable for focusers with payloads up to 4.5 kg. By StuartT, Includes. The most popular focuser project. The set contains everything to support fully automated focusing necessary for remote imaging. MSM20---Micro Touch Focusing System - Stepper Motor for 2.0" Feather Touch focusers, MPA, Televue, Takahashi retrofit focusers, and SCT Micro Feather Touch Focusers Extra stepper FocuserOne is a simple to use yet powerful device that can control almost any type of focusing stepper motor. PlaneWave CDK17 Optical Tube Assembly PW-170101Q. This is a simplified version of the Arduino Focuser, no Rotary encoder, no keypad, no LCD The new low-profile MicroTouch motor gives an extra inch of clearance by moving the motor off-axis. User mini profile. If 1/4 to 1/2 arc second per microstep, and 10 microsteps per fullstep, and 200 fullsteps per revolution, then one stepper revolution covers 500 to 1000 arc seconds. Here is the schematics of the focuser: The controller (containing Arduino Uno microcontroller, BigEasyDriver stepper motor driver, Nokia 5110 LCD display, 4x4 keypad, and some resistors Takahashi FSQ-106EDX4 Quadruplet Refractor Telescope TA-TQE10630. This motor fits all current model Sky-Watcher USA refractors using 2", 2.7" or 3" focusers, including ProED and Esprit Triplet STEPPER MOTOR FOCUSER SOLUTION BASED ON ARDUINO This document describes the range of myFocuserPro products building the myFocuserPro controller units testing High resolution geared stepper motor (Step Angle 7.5, Deg 120, Gear Ration 1:120). At first, I roughly planned to use a motor, whose speed could have been regulated by the user, to let the focuser knob rotate. for the ultimate in accurate auto-focusing. Stepper motor has 0.1 They are also used to browse the menu or move the cursor while in the menu. Welcome to MoonLite Telescope Accessories A manufacturer of premium of traditional Crayford style focusers and Worm drive 2 axis rotating focusers. The previous MicroTouch focus motor was in line with the axis of the focuser, which made it protrude out farther from the back of the telescope, potentially interfering with a camera or other accessories. Shop our broad selection of Pro Telescope, or try a simple search for a more particular Pro Telescope using the search. Stepper Motor for Explore Scientific Focusers Motorize your Explore Scientific focuser with our powerful stepper motor. Here at Radian Telescopes, we believe in building gear that works seamlessly with any system, so you can focus on doing what you love capturing awe-inspiring images of the cosmos instead of wasting hours A stand alone version that is robo focus compatible $190 (customer provides Arduino ASCOM Focuser Pro2 DIY Version 2 of the myFocuser Project myFocuserPro2 is an ASCOM - INDI - LINUX telescope focuser with a large range of Plug in the USB, then configure the Stellarium telescope plugin to connect directly using the Meade LX200 compatible protocol. Inside is the motor control electronics card. Our site has access to hundreds of thousands of items from retailers online, so our site may have just what you are looking for! This installation process was straightforward The motor focuser is used to control the focusing knob of the Celestron C6 SCT. Stepper can be quickly for the ultimate in accurate auto-focusing. Pegasus Astro Stepper Motor Kit Review. The Pegasus Astro stepper motor kit is an affordable way give your astrophotography telescope a huge upgrade. Once installed, it allows you to make precision adjustments to your telescope focus without touching the telescope. Driver for the Trinamic TMCM-1110 stepper motor controller/driver module. Buttons * 3 (control focuser) Potentiometer * 3 (change speed of stepper motor and adjust brightness/contrast of LCD) #6 screws and nuts (install 3D printed This Handy Stepper Motor unit only operates with the 2-Inch Focuser Boss II electronic focuser. PlaneWave CDK12.5 Optical Tube Assembly PW-125101. Dual Motor Focus Controller Focus fast, reliable , and accurate your telescope using a stepper or DC motor and our controller. Then I found out about some neat little stepper motors you can get for almost nothing on ebay. The FocusLynx DirectSync TEC system is a retrofit module for the TEC 3.5" Large Focuser and includes the new DirectSync digital motor with built-in temperature sensor.. Stepper The HSM35 motor unit fits the 3.5" Feather Touch Rack/Pinion focuser and the 4.0" Astro Physics focuser with the Feather Touch Upgrade. The focuser and motor allow loading with accessories up to a maximum of 12 kg (for example CCD cameras with filter All hardware type are equivalent for USB connection. This Starlight Instruments Handy Stepper Motor fits 2.0", 2.5", and 3.0" Feather Touch rack & pinion focusers as well as the 2.7" Astro-Physics focuser with Feather Touch upgrade. The camera is attached to an eyepiece and the whole assembly is going to be controlled by a low power single board computer. OnStep Telescope is an open, SilentStepStick Trinamic TMC2130 stepper motor driver. Use the LakesideAstro focuser on a second telescope by adding an additional motor assembly. This resolution is enough to set focus in instruments with focal ratio f/4 and slower. Z motor CCW = handpad CCW = mouse left (4 clicks) = aux 17 = mouse focus fast I would put a Bahtinov mask on the scope and use the fine focus knob to dial it in. Delivery date : 3-4 weeks. I am the first With Pegasus Astro DMFC, you could empower your telescope with motorised focuser capability and with the right software, autofocus is just a few clicks away! Stepper motor has 0.1 degree step size. The third assembly is a mounting plate for the stepper motor. The mounting bracket for the motor is cut from a 4" piece of right-angle aluminum stock. The HSM20 motor unit fits the 2.0" Feather Touch focusers, MPA Retrofits (Takahashi and TeleVue), and Micro Feather Touch Telescope Focusers for the SCT scopes. El Museo cuenta con visitas guiadas, donde un experto gua el recorrido por las diferentes salas. It seems that the 12V version is using much less current as compared to the 5V version when supplied with 12V. This is my first experience with an Arduino project. The HSM30 YouTube. MAK127SP Stepper focuser with M5Stack I was able to control the focus adjustment of the telescope mak127 sp by the stepping motor which connected to M5Stack. The stepper motor has a 0.1-degree step size Its housing design allows for manual focus knob adjustments by merely masutokw. Z motor CW = handpad CW = mouse right (3 clicks)= aux 16 = mouse focus fast plus = LX200 focus out. The controller board is Arduino Nano and the stepper motors is the 5V or 12V versions of 28BYJ48. System includes custom designed stepper Hi. Takahashi TOA-130NFB Refractor TA-TOK13310. Version3: Same features, more powerful motor outputs, in a If you have The Tak option will fit any Takahashi 4" stock Timing belt. Dividing this into 360 Extra stepper motor for the MicroTouch Autofocuser. High Resolution Stepper motor MTSF-1000 controller cable adapter for M68 to 2" with clamping rings. In this video, I'll show you the latest upgrade to my astrophotography setup. I then examined various ways of doing it, and I ended up with the General Emergencies: See the Emergencies page: Your Scheme: Please Login to see scheme specific contacts: Client Meeting Hours: 6PM to 9PM weekdays: Your Strata Manager: See this page for contact details: Our ABN: 31 064 030 324 Hello all. RF3. On request I can send you a video of how it works. The plate is designed Knob/Motor = High Res Stepper Motor w/ Dual Port DRO Display controller Temperature sensor = 1 X temperature probe Selling the entire set for $500 (Originally cost me $900). COSTO: $70 por persona A popular DIY ASCOM focuser with more than 108,000+ downloads. I plugged in a geared Nema11 stepper motor there and 3D printed an assembly to attach that stepper motor to my focus knob of my telescope. Product Description: Complete RoboFocus system, ready to install and operate on your specific telescope/focuser. Due to its high resolution and torque, the FocusCube should be placed on the coarse knob / direct shaft of your telescope focuser. The kit just contains the electronics - it is up to the user to find a stepper motor and attach it to their own telescope focuser. It interfaces to the computer via USB and comes with an ASCOM driver. This means I can use FocusMax to do the focusing. I have the ASI1600MC and I can shoot in 8bit Raw, 16bit Raw, Luma and 24bit RGB. I placed a rubber washer between the mounting bracket and the Moonlight to keep from scratching the focuser's finish. This solution is most widely used in commercial focusers. This project is DIY Arduino telescope focuser. These companies offer a comprehensive range of Stepping Motors, as well as a variety of related products and This motor unit allows both manual and motorized focusing of your TEC telescope. Stepper motor has 0.1 degree step size, easily lifts 8 pounds. Cheap Stepper Motor Focussing for an Astro-Tech AT8RC Telescope. Press and hold (DEC+), (DEC-) buttons to move a telescope along the DEC direction, (R.A.+), (R.A.-) to move a telescope along the R.A. direction. The MicroTouch allows autofocusing of a CCD camera when interfaced with a computer (via USB). Je viens de rcuprer mon tlescope qui tait en rvision chez Skyvision et en rentrant je maperois quils mont rendu mon usb focuser en 2 morceaux : le moteur et le rducteur. Keep in mind when it says focuser it just means using a stepper motor to make your own focuser. arduino telescope autoguider. Quick demo of my motorized focuser, and I will create a detailed tutorial if enough people are interested. Description. Press and holding an arrow key for a fast scrolling. Search: Jmi Focuser. An autofocuser is a piece of kit that attaches to your telescopes focus knob. The HSM20 motor unit fits the 2.0" Feather Touch focusers, MPA Retrofits (Takahashi and TeleVue), and Micro Feather Touch Telescope Focusers for the SCT scopes. With the Pi Zero and a stepper motor, he's now able to focus the telescope with more accuracy and and step/direction stepper drivers. I have lots A key component for The Arduino drives a 28YBT-48 DC 5V stepper motor, using a ULN2003 driver. Arduino ASCOM Focuser Pro2 DIY myFocuserPro2 is an ASCOM - INDI - LINUX telescope focuser with a large range of options. Motorize your Camera or Telescope focus ring with our powerful stepper motor. The Starizona MicroTouch autofocuser is designed to work with the popular Feathertouch line of focusers from Starlight Instruments. 200,000+ file downloads. With Pegasus Astro DMFC, you could empower your telescope with motorised focuser capability and with the right software, autofocus is just a few clicks away! Its radical design allows you to switch from motorized to hand focusing by a simple twist of the motor housing. It take automatic control of the CCD camera and focuser, and dances around magically on the screen, arriving at perfect focus within about 30s to 3 minutes depending on where you started It also should generate less heat. Price (US$): 495.00. It consists of relatively small stepper motor connected with proper gear box with Equatorial or Altazimuth Mode. If you have a different diameter of the telescope please contact me, maybe I can find another base for the focuser. With Pegasus Astro DMFC, you could empower your telescope with motorised focuser capability and with the right software, autofocus is just a few clicks away! Use this to easily transfer the MicroTouch between PlaneWave CDK14 Optical Tube Assembly PW-140101Q. Starting out with a Pegasus motor focuser 1 2 3. Joined: Tue Jan 27, 2015 12:40 pm. Unipolar focusing stepper motor 12V with built-in 1:75 reduction gearbox that gives resolution 3600 steps per revolution that correspond to about 5 micrometers per step at standard Crayford focuser. Motorize your Explore Scientific focuser with our powerful stepper motor. The hand controller provides an easy method of focusing the telescope, featuring IN and OUT buttons, a 2-line display, slow and fast speed rate control. There are lots of additional pieces needed, such as a perfboard to build the project on, an RJ type connector if you want an ST4 port, sockets for connecting the motors, and capacitors. If you look just for the focuser controller to your telescope, then you are in the right place. The High resolution Stepper motor options is for PC operation and come in 3 different configurations. Extra stepper motor unit for the MicroTouch Autotelescope focuser (works with both WIRED and WIRELESS). Focus accurate and fast your telescope using our powerful Motor Focus Kit. Astro-Physics GTO (4.1.25, combined telescope/focuser driver) Updated 10-Sep-2008 to correct the installer (it now registers this driver's Focuser as well as its Telescope), no changes to driver itself. Driver for the Trinamic TMCM-1110 stepper motor controller/driver module. Two methods of motorizing telescopes are open loop stepper motors and closed loop servo motors with tachometer or encoder feedback. With an open loop stepper motor system, the motors are commanded to move: there is no feedback that the movement took place. This will open your focuser settings window. FocuserOne device supports unipolar stepper motors (like Robofocus or Moonlite), and bipolar as well.